logo
Home ProductsDecorative Wooden Mouldings

Hand-Carved Corner Rosette Block Decorative Wooden Moulding Primed Surface 90mm OEM Custom

Certification
China Xiamen Jinxi Building Material Co., Ltd. certification
China Xiamen Jinxi Building Material Co., Ltd. certification
I'm Online Chat Now

Hand-Carved Corner Rosette Block Decorative Wooden Moulding Primed Surface 90mm OEM Custom

Hand-Carved Corner Rosette Block Decorative Wooden Moulding Primed Surface 90mm OEM Custom
Hand-Carved Corner Rosette Block Decorative Wooden Moulding Primed Surface 90mm OEM Custom Hand-Carved Corner Rosette Block Decorative Wooden Moulding Primed Surface 90mm OEM Custom Hand-Carved Corner Rosette Block Decorative Wooden Moulding Primed Surface 90mm OEM Custom

Large Image :  Hand-Carved Corner Rosette Block Decorative Wooden Moulding Primed Surface 90mm OEM Custom

Product Details:
Place of Origin: Fujian, China
Brand Name: OEM
Certification: FSC / CARB P2
Model Number: DM-RS90
Payment & Shipping Terms:
Minimum Order Quantity: 1000 Pieces
Price: USD 1.10 - 2.40 / Piece (FOB Xiamen)
Packaging Details: 50 pcs per carton, shrink film plus five-wall export carton
Delivery Time: 25-30 Days after deposit
Payment Terms: T/T 30% deposit, balance against copy of B/L
Supply Ability: 300000 Pieces per Month

Hand-Carved Corner Rosette Block Decorative Wooden Moulding Primed Surface 90mm OEM Custom

Description
Material Options: Chinese Fir, Rubber Wood, MDF Face Size: 90 / 110 / 130 Mm Square
Relief Pattern: Acanthus, Oak Leaf, Shell, Blank Face Surface: Primed, Raw Sanded, Varnished
Installation: Nail Or Adhesive Fix, Screw Through Centre Application: Interior Door Casing, Baseboard Corners, Ceiling Layouts
Custom Service: OEM Drawing, Logo Stamping, Private Label Cartons
Highlight:

carved corner rosette block

,

primed wooden rosette moulding

,

decorative ceiling rosette trim

Carved Corner Rosette Block for Architectural Wood Trim

A corner rosette block is the small detail that decides whether a moulding run looks factory-assembled or architect-built. This hand-carved block is cut from kiln-dried Chinese fir at 10 to 13 percent moisture content, shaped on a copy lathe and finished by hand so the acanthus relief keeps a crisp, deep shadow line under raking light. The 90mm square face sits flush with most standard casing and baseboard profiles, so an installer can terminate a run at a door jamb without fabricating a return on site.

Because the block is machined from solid timber instead of assembled from shorts, the corners hold their shape after acclimatisation. Each face is sanded to 180 grit, sealed with a single gesso coat and finished with two coats of water-based primer sanded between passes, so a finish carpenter can topcoat straight out of the carton. Blocks ship in matched grain sets for jobs where a visible stain finish is specified.

Key Features
  • Carved Detail That Survives Paint: The relief is cut 6mm deep, so the acanthus leaf still reads clearly after three coats of paint instead of filling in and going soft, the usual complaint with pressed-resin blocks.
  • Paint-Ready Primed Face: Gesso plus two primer coats, sanded between passes, accept both alkyd and acrylic topcoats without grain raise or sanding sealer.
  • Stable Kiln-Dried Fir: Timber is dried to 10 to 13 percent moisture content and finger-jointed where required, keeping movement below 1mm across a 2.4m run.
  • Profile-Matched Sizes: 90mm, 110mm and 130mm faces are held in stock, so a block can be matched to almost any casing width without new tooling.
  • OEM Carving Service: Custom radii, leaf patterns and block depths are cut to drawing, with a 20-day sample lead time for orders above 5,000 pieces.
Technical Specifications
ParameterSpecification
MaterialKiln-dried Chinese fir, 10-13% MC
Face Dimensions90 x 90 mm (110 mm / 130 mm optional)
Thickness20 mm
Relief Depth6 mm hand-carved acanthus pattern
Surface FinishGesso plus 2 coats water-based primer
Dimensional Tolerance±0.5 mm
Packing50 pcs per export carton
Typical UseDoor casing, baseboard termination, ceiling medallion corners
Applications

Corner blocks are used wherever two trim runs meet at 90 degrees: door and window casings, baseboard corners, chair rail junctions and the four corners of a ceiling medallion layout. The block removes the need for a mitre joint on the casing, which is the joint that most often opens up after a heating season and shows a hairline crack above a door.

The 90mm face is specified most often for residential work, while the 110mm and 130mm versions suit hotel corridors, club rooms and restoration projects where casing widths run above 100mm. Because the relief is carved rather than moulded, the block also works for stain-grade Victorian and Edwardian reproductions where pressed profiles look flat next to solid wood trim.

Packaging & Quality Assurance

Blocks are nested face to face in sets of 50, wrapped in shrink film and packed into a five-wall export carton with corner protection. Finished faces never touch a carton wall, so primed surfaces arrive without scuffing. Standard carton gross weight stays under 22kg for manual handling at site.

Every production batch is checked for face squareness, relief depth and moisture content before packing, and a retained sample is kept for 12 months. We supply a packing list with carton quantities per pattern, and cartons are labelled with the buyer reference so mixed pallets can be split at the warehouse without opening boxes.

Contact Details
Xiamen Jinxi Building Material Co., Ltd.

Contact Person: johnliu

Send your inquiry directly to us (0 / 3000)