|
Product Details:
|
| Material Options: | Rubber Wood, Beech, Oak, MDF | Size Range: | 150 Mm To 600 Mm Length |
|---|---|---|---|
| Pattern Library: | Acanthus, Rosette, Shell, Ribbon, Floral Vine | Surface: | Raw, Varnished, Primed, Gilded |
| Fixing Method: | Glue And Pin, Or Screw Through Hidden Points | Application: | Cabinet Doors, Furniture, Mirror Frames, Wall Panels |
| Custom Service: | Drawing-based Tooling, Private Label Packing | ||
| Highlight: | acanthus leaf carved applique,varnished wooden onlay,decorative furniture applique |
||
This applique is the piece a joiner reaches for when a plain cabinet door needs weight at the panel centre or a wall needs a focal ornament without a full moulding run. The acanthus scroll is carved in relief from kiln-dried hardwood, then hand-sanded through three grits so the veins and curls stay sharp instead of rounding over the way cast resin ornaments do after a few years of cleaning.
At 200mm by 150mm and 12mm thick, the onlay is thin enough to sit on a flat panel without a visible edge shadow, yet thick enough to survive being pinned and glued. The back is left flat and lightly scored so wood glue keys into the surface, and the varnished face allows a buyer to either clear-coat over it or scuff and paint it to match a custom finish.
Key Features| Parameter | Specification |
|---|---|
| Material | Kiln-dried rubber wood, 10-12% MC |
| Dimensions | 200 x 150 mm (300 x 200 / 400 x 250 optional) |
| Thickness | 12 mm at the highest relief point |
| Pattern | Acanthus scroll, symmetrical |
| Surface Finish | Hand sanded 120/180/240 grit, 2 coats clear varnish |
| Dimensional Tolerance | ±1.0 mm |
| Fixing | Wood glue plus 18 gauge pins |
| Packing | 20 pcs per carton with foam interleaves |
The onlay is specified for cabinet door centres, drawer fronts, furniture aprons, mirror frames, headboard panels and fireplace surrounds. Cabinet makers use pairs mirrored left and right to frame a raised panel, while interior designers place a single large piece above a console or on a panel wall where a moulding run would be too busy.
Because the ornament is carved wood rather than cast composite, it accepts stain, glaze and paint in the same way as the surrounding joinery, which keeps a hand-finished furniture look consistent across a whole order. It also sands and repairs like solid timber, an advantage on site where a chipped corner on a composite ornament usually means a replacement piece.
Packaging & Quality AssuranceOrnaments are packed in pairs with foam interleaves so the raised tips never contact another piece, then boxed in five-wall cartons with a moisture barrier liner. Cartons are sized to keep gross weight under 20kg, allowing one person to handle a full box without a pallet truck.
Each batch is inspected for relief depth, symmetry and finish adhesion on a 5 percent sample basis. Digital photos of the inspected lot are kept on file, and buyers can request them before shipment for approval against the original sample.
Contact Person: johnliu