|
Product Details:
|
| Material Options: | Rubber Wood, Oak, Beech, MDF | Size Range: | 150 Mm To 400 Mm Face |
|---|---|---|---|
| Scroll Pattern: | Classical, Mission, Plain, Customer Drawing | Surface: | Primed, Raw Sanded, Varnished, Stained |
| Fixing: | Hidden Pocket, Keyhole Plate, Through Screw | Application: | Floating Shelves, Mantels, Hood Surrounds, Bench Ends |
| Custom Service: | Drawing-based Tooling, Load Testing Reports | ||
| Highlight: | load-bearing corbel bracket,decorative wooden corbel,shelf mantel support corbel |
||
A corbel is a structural component dressed as ornament, and that double duty is what separates a usable bracket from a decorative blank. This bracket is machined from solid rubber wood with the grain running vertically through the body, so the load path from the shelf above runs along the fibres instead of across them, which is where cheap brackets fail.
The 150mm by 150mm face and 250mm drop suit a 250mm deep shelf, a mantel beam or a range hood surround. A recessed pocket on the back face hides the fixing screws, and the scroll is sanded through three grits before a single coat of primer, so the bracket is ready for paint or can be scuff-sanded and stained to match adjacent joinery.
Key Features| Parameter | Specification |
|---|---|
| Material | Solid rubber wood, kiln-dried 10-12% MC |
| Face Dimensions | 150 x 150 mm (200 x 200 / 250 x 250 optional) |
| Drop | 250 mm (300 / 350 mm optional) |
| Recommended Load | Up to 40 kg per pair at 400 mm centres |
| Fixing | Hidden pocket, 6 mm screws plus wall plug |
| Surface Finish | Sanded 120/180/240 grit, one primer coat |
| Dimensional Tolerance | ±1.0 mm |
| Packing | 2 pcs per foam-lined carton, 20 pcs per master box |
Corbels carry floating shelves in kitchens and studies, support mantel beams over fireplaces, frame range hood canopies and finish the underside of bar counters. In joinery work they are also used under window seats and bench ends, where a decorative bracket hides the fixing detail at the same time as it stiffens the assembly.
For heavier mantels the brackets are normally paired at 400mm centres and screwed into wall studs or a timber fixing plate. Because the load path runs vertically through the body, the same bracket suits both painted interior work and stain-grade fireplace surrounds.
Packaging & Quality AssuranceBrackets are packed two per foam-lined carton with the scroll faces separated, then twenty pieces per master carton. Cartons are strapped and labelled with model, size and lot number so pairs stay matched on site.
Each lot is checked for face squareness, pocket depth and scroll symmetry, and a load sample is pulled every 500 pieces for a bench test. Buyers can request the test record with shipping documents.
Contact Person: johnliu