|
Product Details:
|
| Material Options: | Moisture-resistant MDF, Solid Pine, Fir | Length Options: | 2000 / 2400 / 2700 Mm |
|---|---|---|---|
| Flute Pattern: | Ribbon And Reed, Plain Flute, Stop-fluted | Surface: | Primed White, Raw, Painted To RAL |
| Installation: | Adhesive Or Pin Fix To Jamb Lining | Application: | Door Surrounds, Panelling, Bookcases, Bar Fronts |
| Custom Service: | Matched Capital And Plinth Sets, OEM Profiles | ||
| Highlight: | ribbon reed fluted pilaster,moisture-resistant wood trim,primed pilaster moulding |
||
A fluted pilaster turns a flat door surround into a framed opening, and the ribbon-and-reed variation adds a finer rhythm than a plain flute because the raised reed sits inside each channel. This pilaster is machined from moisture-resistant MDF in 2000mm lengths, which covers a standard 1980mm door opening without a joint at the most visible point of the frame.
At 120mm wide and 20mm deep, the profile is substantial enough to read as a pilaster rather than a casing, while still fitting within the reveal of a standard wall. The face is primed and sanded, and the flutes are cut before priming so the recesses carry the same finish as the face, keeping the shadow lines sharp after topcoat.
Key Features| Parameter | Specification |
|---|---|
| Material | Moisture-resistant MDF |
| Length | 2000 mm (2400 / 2700 mm optional) |
| Width | 120 mm |
| Depth | 20 mm |
| Flute Pattern | Ribbon and reed, 18 mm pitch |
| Surface Finish | Primed white, sanded |
| Dimensional Tolerance | ±0.3 mm |
| Packing | 10 lengths per bundle, shrink wrapped |
Pilasters are installed either side of internal door openings, at the jambs of double doors, and as vertical framing on wall panelling, bookcases and bar fronts. In classical interiors they are also used to frame a fireplace opening or to break up a long run of flat cabinetry.
The ribbon-and-reed pattern is normally chosen where a room already has egg-and-dart or dentil detail, because the reed scale sits comfortably against those motifs. Combined with a matching capital and plinth block, the pilaster turns a standard casing into a full architectural surround without structural work.
Packaging & Quality AssuranceTen lengths are bundled with shrink wrap and end caps, then stacked flat with corner protection on pallets. Bundles carry profile code, length and batch reference.
Inspection covers flute depth, reed consistency and primer coverage, with a straightness check on every bundle. Lengths outside 1.5mm over 2m are rejected before packing.
Contact Person: johnliu